Index — Appliances
Browse by appliance type
Each type fails in its own way and is checked in its own order. Start with the machine, not the brand.
| Type | Summary | First thing checked | Salt air |
|---|---|---|---|
| Refrigeration | Built-in and integrated refrigerators, freezer columns, undercounter drawers, wine storage and standalone ice machines. | Does it still cycle off? | Leading cause |
| Cooking | Professional and dual-fuel ranges, gas rangetops, induction and radiant cooktops, single and double wall ovens, warming drawers. | What the appliance is being asked to do | Secondary |
| Dishwashers | Built-in, panel-ready and fully integrated dishwashers, including drawer units. The appliance where the installation causes as many calls as the machine. | Filter, sump and spray-arm rotation | Secondary |
| Steam & Coffee | Convection and combi-steam ovens, steam generators, plumbed and reservoir-fed built-in coffee systems. The most mechanically dense appliances in the kitchen. | What the machine is actually reporting | Secondary |
| Ventilation | Wall and island hoods, integrated liners, downdraft extractors, and inline or roof-mounted remote blowers. The most exposed equipment we service. | Where the blower actually is | Leading cause |
Where the list stops
This is a kitchen company. What we repair is the equipment built into a kitchen: refrigerator and freezer columns, wine and undercounter cooling, standalone ice machines, ranges, rangetops, cooktops and wall ovens, dishwashers, steam ovens and built-in coffee systems, and kitchen ventilation — a hood, its liner, and the inline or roof-mounted blower and duct run that serve it. What we do not touch is the machinery that heats and cools the building. We do not install, service or replace furnaces, heat pumps, central air handlers, heating boilers, water heaters, pool heaters or a building’s ductwork, and we do not send somebody to look at one. If that is what you need, an HVAC contractor is the trade to call, and telling you so on the phone costs less than a visit.
01 What it costs
What does a repair cost by appliance type?
The head of the table, which every appliance page below narrows to its own rows. A defrost fault shows the defrost band; a pump shows the pump band.
$80 Flat $80 diagnostic covering the visit and the full diagnostic sequence, credited toward the repair once you approve the work.
| Repair | Typical total |
|---|---|
| Door gasket or seal replacement | $230–$620 |
| Evaporator or condenser fan motor | $250–$580 |
| Defrost heater, thermostat or sensor | $240–$640 |
| Ice maker, water valve or supply line | $230–$630 |
02 Questions
What do people ask before choosing an appliance page?
- Should I book by appliance or by brand?
- By appliance. A dishwasher is checked in the same order whoever built it — filter, sump, spray-arm rotation, drain path, then fill, then heat — and starting from the machine gets a technician to the fault faster than starting from the badge on the door.
- What does a repair cost by appliance type?
- The diagnostic is $80 flat and comes off the total once you approve the work. Completed work across these appliance types has landed between $230 and $640, parts and labor together — here, door gasket or seal replacement $230–$620, and evaporator or condenser fan motor $250–$580. That is what the job has cost before, not a quote; the firm figure is written down after the diagnosis.
- Does the appliance have to come out of the cabinetry?
- Sometimes, and the diagnostic covers finding out — some faults are reachable from the front and some are not. Where an appliance has to come out, the removal and the reinstatement are separate lines on the written estimate, agreed before anything moves.
03Customer reviews
Jobs across these appliance types
Three of the reviews published on this site, rotated by page. Each appliance page leads with the ones filed against it.
4.3out of 5 from 90 published reviews
Rated 5 out of 5
The hood in our Marsh Landing kitchen barely pulled smoke off the range. He found the duct had been squeezed down where it crosses the joists and told me straight that a bigger blower would not fix it. Not the answer I wanted.
Grant L.
Rated 4 out of 5
It would not start at all, though the panel lit up and looked willing. He found a door latch switch that had failed closed, replaced it, and checked the harness for chafing where it crosses the hinge.
Clement H.
Rated 5 out of 5
Ours hummed loudly enough to hear from the next room. He identified a failing bearing in the condenser fan motor, changed it, and vacuumed the whole compartment out while it was open. Back to the quiet it used to be.
Norah C.